Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Fort Worth?
Fireplace services in Fort Worth typically run between $149 and $2,600 depending on what your chimney actually needs. A standard chimney sweep and basic inspection averages $199 to $349, while a full rebuild or major structural repair can reach $2,500 to $6,000 in older Fort Worth homes with clay tile flues. The good news: most service calls land in the $200 to $600 range, and you should never pay a dime before seeing a written price.
At Flint Chimney Co Fort Worth, every job gets a documented quote before a single tool comes off the truck. That’s The Garrison Standard, and it’s how Hank Delano runs every call: price first, work second, no surprises at the end.
Fireplace Services Cost Breakdown (2026)
Here’s what Fort Worth homeowners can expect to pay in 2026, based on current market rates across Tarrant County:
| Service | Typical Price Range | What’s Included |
|---|---|---|
| Chimney Sweep (Level 1) | $149 – $249 | Full flue cleaning, firebox brushing, damper check, visual inspection |
| Chimney Sweep + Level 2 Inspection | $249 – $399 | Everything above plus video scan of the flue interior |
| Level 2 Inspection (standalone) | $149 – $299 | Video camera inspection, structural assessment, code compliance check |
| Chimney Cap Installation | $225 – $475 | Supply and install cap, including scaffolding/ladder access |
| Damper Repair / Replacement | $195 – $425 | New top-sealing damper or cast-iron throat damper, installed |
| Flue Relining (stainless steel) | $1,400 – $2,600 | Custom-fit DuraFlex liner, insulation, connection, and cap |
| HeatShield Cerfractory Resurfacing | $1,200 – $2,200 | Restores cracked clay tile flues without demolition |
| Firebox Repair (minor masonry) | $400 – $900 | Repointing mortar, replacing damaged firebrick, tuckpointing |
| Full Chimney Rebuild (above roofline) | $2,500 – $6,000+ | Demolition and rebuild of crown, shoulder, and flue section |
| Gas Log Set Installation | $350 – $900 | Vented or vent-free log set, gas line connection, and ignition check |
These numbers reflect what we see across Fort Worth neighborhoods like Ridglea Hills, Fairmount, TCU/Westcliff, Arlington Heights, and Wedgwood. Homes built before 1970 with original clay tile liners often fall on the higher end of repair ranges because the mortar joints between tiles fail after decades of North Texas heat cycling. Newer box chimneys with factory-built pipe typically cost less to service but may still need cap replacement or chase cover work more often.
What Drives the Price Up or Down
The single biggest variable is access. A single-story ranch in Benbrook with a walkable roof pitch keeps labor costs down. A two-story Colonial in Monticello with a steep 10:12 pitch means more setup time, safety rigging, and a second technician on site. That’s not a markup, it’s just the real cost of doing the job without cutting corners on safety.
The second variable is liner condition. If your flue tiles are cracked, spalled, or missing entirely, a basic sweep won’t fix anything. You’ll need either a stainless reline (DuraFlex is the brand we specify most often for Fort Worth masonry chimneys) or a HeatShield resurfacing. Both are major repairs, but they’re also the difference between a fireplace that drafts properly and one that leaks carbon monoxide into the house.
What Affects Fireplace Services Pricing in Fort Worth
- Chimney age and construction. Most Fort Worth homes built from the 1950s through the 1980s used clay tile liners. Those tiles crack under repeated freeze-thaw cycles and summer heat expansion. Repair costs climb once tiles start spalling into the smoke chamber.
- Roof pitch and chimney height. Steeper roofs require scaffolding, roof jacks, or lift equipment. A 25-foot chimney on a two-story home in Tanglewood takes longer to service than a 12-foot flue on a ranch in North Richland Hills.
- Creosote buildup severity. Fort Worth winters are short but intense. Homeowners who burn oak and mesquite every night from November through February can accumulate glaze-stage creosote, which requires rotary cleaning tools and takes twice as long as a routine sweep.
- Whether the fireplace is wood-burning or gas. Gas log sets still need annual service (burner cleaning, carbon monoxide testing, log placement), but gas fireplaces don’t produce creosote. The service profile is different and typically runs slightly lower than a full wood-burning sweep.
- Repair history. If a previous company installed a cheap cap or used the wrong mortar, you’ll pay to undo that work before the real fix starts. We see this regularly in Fort Worth’s Mistletoe Heights and Park Hill neighborhoods, where 1970s-era chimneys got band-aid repairs for decades.
- Time of year. Peak season runs from late September through January. Booking a sweep in March or April when the fireplace is dormant won’t necessarily get you a lower price, but you’ll get faster scheduling and more flexible appointment windows.
Fireplace Services in Fort Worth: What You’re Actually Paying For
Let’s talk about the three services that make up 90% of what we do, and what each one really involves. This matters because a $149 chimney sweep and a $149 “inspection special” from a flyer aren’t the same thing. You deserve to know exactly what your money buys.
Chimney Sweep: $149 – $249
A proper sweep removes creosote, soot, and debris from the full length of the flue, not just what a brush can reach from the firebox. It includes the firebox, smoke chamber, damper area, and flue interior. At Flint Chimney Co Fort Worth, we also check the cap, crown, flashing, and chase cover as part of the standard sweep. If we see a problem, we document it with photos and put the repair price in writing before we leave.
North Texas has a specific weather pattern that makes annual sweeping genuinely important: hot, humid summers followed by sharp winter cold snaps. Moisture gets into the flue during spring rains, sits there through August, then freezes fast in a January cold front. That expansion and contraction is what kills chimney liners. A $199 sweep catches small issues before they become $2,600 relines.
Chimney Inspection: $149 – $299
A Level 2 inspection is the standard for real estate transactions, but it’s also what we recommend whenever you’ve had a chimney fire, noticed water in the firebox, or haven’t used the fireplace in more than two years. We run a video camera up the flue and document every inch of the interior. You get a written report with photos, measurements, and a specific repair scope if anything needs attention.
In Fort Worth, the pre-purchase home inspection almost never includes a thorough chimney evaluation. The general home inspector will shine a flashlight up the flue and check the damper, but they won’t run video. We handle dozens of post-closing inspections every year where the buyer discovers a cracked liner two weeks after moving into a $450,000 home in Ridglea. It’s worth the $249 before you close, not after.
Chimney Repair: $400 – $6,000+
Repairs range from simple mortar repointing ($400 to $900) to full chimney rebuilds above the roofline ($2,500 to $6,000+). The most common repair we perform in Fort Worth is flue relining, because the original clay tiles in 40-to-70-year-old homes have simply reached the end of their service life. A DuraFlex stainless liner carries a transferable warranty from the manufacturer, and our installation carries the 365-Day Done Right Promise on top of that.
Other frequent repairs include chimney cap replacement ($225 to $475), crown rebuilding ($600 to $1,200), and firebox masonry restoration ($400 to $900). Every repair gets a written price before work starts, and every repair carries a one-year written guarantee. If a covered repair fails within 365 days, we return at no charge. That’s not a sales pitch, it’s the garrison code we’ve operated under since 2002.
How to Save on Fireplace Services
Saving money on chimney work isn’t about finding the cheapest bid. It’s about avoiding the expensive problems that come from deferred maintenance. Here’s what actually works:
- Get the sweep done annually, even if you don’t use the fireplace much. A $199 sweep finds a failing crown or a rusting damper before either one turns into a $1,500 repair. This is the single highest-ROI chimney decision you can make as a Fort Worth homeowner.
- Schedule in the off-season. February through August is our slow period. You won’t get a discount, but you’ll get next-day or same-week scheduling, and you’ll beat the September rush when peak season kicks in.
- Bundle services. If you need a sweep and a cap replacement, doing both in one trip saves on the second visit fee, which most chimney companies charge. We don’t charge for return visits on covered repairs, but a bundled service call is always more efficient.
- Fix small masonry issues early. Cracked crown mortar that costs $400 to repair today is a $2,000 rebuild in four years if water keeps getting in. The freeze-thaw cycle in Tarrant County punishes neglected chimneys faster than almost anywhere in Texas.
- Ask for the written price before work begins. This is the Flint standard on every single job. If a company won’t put the number in writing before they start, that’s how you know you’re working with the wrong crew. You’ll never be surprised by the invoice.
Need a ballpark figure for your specific chimney? Call (682) 255-2144 and we’ll talk through what you’re seeing. Estimates are free, and you’ll get a straight answer, even if that answer is “you probably don’t need anything for another year.”
Common Fireplace Problems in Fort Worth Homes (And What They Cost to Fix)
Water Leaks Around the Chimney
Water is the enemy of every masonry chimney in North Texas. The usual culprits are cracked crown mortar, failed flashing, or a missing chimney cap. Repair costs run $400 to $1,800 depending on scope. In older Fort Worth neighborhoods like Fairmount and Ryan Place, we regularly see original 1920s-era chimneys where the crown has eroded to the point that water runs straight down the flue and into the living room during heavy spring storms.
The fix: replace or rebuild the crown with proper Portland cement and expansion joint spacing, then seal the masonry. We use Gelco water repellent on most masonry chimneys because it breathes while keeping water out, which matters in a climate with 90% humidity summers.
Creosote Buildup and Chimney Fires
Creosote is the black, tarry residue left when wood smoke doesn’t fully combust. In Fort Worth, where homeowners burn a lot of oak and pecan, creosote accumulates fast in cold Januaries and Februaries. A glaze-stage creosote fire burns at 2,000°F, hot enough to crack clay tiles and warp steel dampers.
Annual sweeping ($149 to $249) prevents this. If you’ve already had a chimney fire, the damage assessment typically runs $249 to $399 for a Level 2 inspection with video, and repairs usually follow. Don’t burn a fire after a chimney fire until you’ve had that inspection done. That’s a warning we give every Fort Worth homeowner who calls us after seeing flames shoot from the chimney cap.
Drafting Problems and Smoke in the House
A smoky fireplace has three common causes: a cold flue, a damper that’s not opening fully, or negative pressure from a modern HVAC system pulling air down the chimney. The fix can be as cheap as a new damper ($195 to $425) or as involved as extending the chimney height or installing a draft-inducing cap (up to $1,200 for complex cases).
Fort Worth’s flat topography means most homes don’t have the wind-exposure issues you’d see in hill country, but newer tight-built homes in master-planned communities like Walsh and Viridian do experience negative pressure issues that older, draftier houses don’t. Your chimney needs make-up air to draft well, and modern energy-efficient homes often don’t provide enough of it.
Cracked or Spalled Flue Tiles
This is the big one. Clay flue tiles crack over time from heat cycling, water damage, or a past chimney fire. Once tiles fracture, the chimney is unsafe to use because heat can reach combustible materials in the attic and wall framing. The fix is a stainless reline ($1,400 to $2,600) or a HeatShield resurfacing ($1,200 to $2,200), depending on the condition of the original tiles and the flue diameter.
HeatShield is the modern alternative to a full rebuild. The cerfractory material is pumped up the flue as a thick slurry, coating the interior and sealing cracks in place. It works well in Fort Worth’s climate because it bonds to the existing clay tiles and expands and contracts with them, rather than fighting them. For severely deteriorated flues, stainless is the better call. We’ll tell you which one your chimney actually needs, and the written quote will specify exactly which product and which brand we’re installing.
Why Flint Chimney Co Fort Worth Prices Are the Numbers You Can Trust
We’re part of the Garrison Partners family of independently owned chimney service companies, founded in 2002. Every Flint chimney company operates under The Garrison Standard: written pricing before work begins, background-checked uniformed technicians on every call, and a 365-Day Done Right Promise on every repair. Hank Delano runs the Fort Worth operation to that code, and it applies whether you’re getting a $199 sweep in Wedgwood or a $5,000 chimney rebuild in Rivercrest.
The phone is answered by a live person 24 hours a day, seven days a week. That’s not a call center. It’s our dispatcher, sitting in Fort Worth, who knows the difference between a chase cover and a crown cap and can give you a straight answer about scheduling. Call (682) 255-2144 right now and see who picks up.
We specify materials by job, not by margin. When your chimney needs a liner, you’ll see DuraFlex on the quote. When it needs a water sealant, it’ll be Gelco. When the firebox needs repair, we use Olympia Chimney refractory products. When the damper goes, it’s Famco or Copperfield. These are the brands professional chimney contractors across the country trust, and you can verify their specifications independently. That’s the point. We want you to check.
FAQs – Fireplace Services Cost
How much does a basic chimney sweep cost in Fort Worth?
A standard chimney sweep in Fort Worth runs $149 to $249 depending on chimney height, roof access, and creosote buildup severity. This includes the flue, firebox, smoke chamber, and damper area, plus a visual inspection of the cap, crown, and flashing. Call (682) 255-2144 for an exact quote; written estimates are free.
Is it cheaper to repair or replace a chimney?
In most Fort Worth homes, repairing is significantly cheaper than a full replacement. A stainless reline runs $1,400 to $2,600, while a complete chimney teardown and rebuild from the firebox up can run $8,000 to $15,000. We rarely recommend a full replacement unless the masonry itself is structurally unsound. If you’re facing a major decision, we’ll show you the video from the inspection and put both options in writing.
How much does flue relining cost in Fort Worth?
Stainless steel flue relining in Fort Worth typically costs $1,400 to $2,600 installed, including the liner, insulation, top plate, and connection to the appliance. The exact price depends on flue length and diameter. HeatShield resurfacing, which restores cracked clay tiles without a full reline, runs $1,200 to $2,200. We’ll quote both if both are viable, and you decide.
What does a chimney inspection cost, and do I need one?
A Level 2 chimney inspection with video scanning costs $149 to $299 in Fort Worth. You need one if you’re buying or selling a home, if you’ve had a chimney fire, if you’ve noticed water in the firebox, or if the fireplace hasn’t been used in over two years. If you’re just starting regular maintenance, a standard sweep with visual inspection is usually sufficient. Call (682) 255-2144 and we’ll tell you which level is right for your situation.
Can you come today?
Usually, yes, especially outside of the September-to-January peak season. Our Fort Worth dispatch handles scheduling directly; there’s no voicemail tree and no waiting until Monday. A live person answers 24/7. Call (682) 255-2144 and we’ll get you on the schedule as fast as the same day, depending on crew availability.
How much does a chimney cap cost in Fort Worth?
A chimney cap install runs $225 to $475 including the cap, stainless steel mounting hardware, and installation. We use durable stainless caps that stand up to North Texas hail and the constant sun exposure that oxidizes cheaper galvanized caps within a few years. If your current cap is rusted through or missing entirely, a new one is the cheapest way to prevent $700 to $2,000 in downstream water damage.
Get Your Free Estimate
You don’t have to wonder what your chimney project will cost. Call (682) 255-2144 and tell us what you’re seeing. We’ll give you a straight answer over the phone, and if a service call makes sense, we’ll put the full price in writing before any work begins. That’s how The Garrison Standard has worked since 2002, and it’s how Hank Delano runs Flint Chimney Co Fort Worth on every call, every day.
Still just researching? Start with our Fireplace Services in Fort Worth guide or head back to our home page to learn more about how we work.
Pricing reflects the Fort Worth market as of 2026. Flint Chimney Co Fort Worth offers free estimates – call (682) 255-2144.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Fort Worth and Tarrant County since 2002.
What Our Customers Say
"Good work on the damper replacement. Had to wait for a part for a few days, but they stayed in touch."
- Glenn D."Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H."Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P.