Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Fort Worth?
Chimney cap and crown work in Fort Worth typically runs $300 to $2,200 depending on the scope. A standard galvanized or stainless steel chimney cap installed runs $300 to $700, while a poured concrete crown replacement runs $900 to $2,200. Add a few hundred more if both the cap and crown are compromised and need replacement in the same visit.
What you pay comes down to three things: the material you pick (galvanized, stainless, or copper), the condition of the crown underneath, and how accessible your roofline is from the ground. Fort Worth’s clay-heavy soils and the Chimney Cap & Crown in Fort Worth work we do reflect a market where spring hailstorms and summer heat cycles push many homeowners to address both components at once. Here’s what the numbers look like in 2026.
Key Takeaways: Chimney Cap & Crown Costs in Fort Worth
- Typical total: $300 to $2,200 for cap and crown work combined, depending on material and condition.
- Cap only: Most Fort Worth homeowners pay $300 to $700 for a galvanized or stainless cap installed.
- Crown only: A poured concrete crown replacement runs $900 to $2,200, including old crown removal and disposal.
- Biggest cost driver: Whether the crown has cracked badly enough that water has reached the flue or the brick below.
- Warranty that matters: Every Flint Chimney Co Fort Worth repair carries a written 365-Day Done Right Promise in writing before work starts.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s the line-item pricing we give on the phone because you shouldn’t have to book a visit just to learn a ballpark:
| Item | Typical Fort Worth Range | Notes |
|---|---|---|
| Galvanized steel chimney cap | $300 – $475 | Painted or non-painted; adequate for a single flue |
| Stainless steel chimney cap | $450 – $700 | Better lifespan in North Texas weather; we typically recommend this option |
| Copper chimney cap | $800 – $1,600 | Decorative; priced by flue size and cap style |
| Multi-flue cap (covers several flues) | $600 – $1,200 | Custom fabricated to your crown footprint |
| Chimney crown repair (patch/seal) | $250 – $600 | Works if cracks are hairline and not structural |
| Chimney crown replacement (poured) | $900 – $2,200 | Includes demolition of old crown, form, pour, and cure |
| Cap + crown replacement together | $1,200 – $2,800 | Most common combo when both have failed |
Those ranges reflect what we quote and bill across Fort Worth neighborhoods from Ryan Place to Westcliff to the newer builds north of Loop 820. A two-story chimney on a steep-pitched roof in Arlington Heights will run higher on labor than a single-story ranch in Wedgwood with easy ladder access. The material prices don’t change much. The labor and setup do.
When we quote a crown replacement, we’re building a new form, mixing concrete with slight slope away from the flue, and curing it properly so water sheds instead of pooling. That’s the difference between a crown that lasts and one that cracks again in two seasons. We put the price and the scope on paper before any tool comes off the truck, and the number on that paper is the number you approve.
What Affects Chimney Cap & Crown Pricing in Fort Worth
- Roof pitch and chimney height: Fort Worth neighborhoods like Mistletoe Heights and Berkeley Place have steep-pitched roofs on older two-story homes. That means scaffold or ridge ladder setup, which adds an hour or two of labor compared to a shallow ranch roof.
- Crown condition: If the crown is still sound, a cap install is straight replacement. If the crown has spalled (crumbled at the edges) or cracked through, the cap won’t seal right, and you’re looking at crown work in the same job.
- Flue count: A single-flue cap runs less than a multi-flue unit. Older Fort Worth homes built before central heating sometimes have two or three flues in one chimney, which calls for a custom-sized cap or a multi-flue cap bolted across the crown.
- Material choice: Galvanized is the budget option and typically lasts 5 to 8 years in North Texas before rust sets in. Stainless runs a few hundred more and routinely lasts 15-plus years. Copper caps, common on higher-end homes in Westover Hills, are priced by the pound of copper and flue dimensions.
- Accessibility and masonry condition: If the brick at the top courses is loose or the flue tile is cracked, we flag it on the inspection before touching the cap and crown. You can’t anchor a cap to failing masonry and expect it to hold, so some jobs carry extra masonry prep. We write that into the quote rather than surprising you after the fact.
- Time of year: Spring in Fort Worth brings hail season, and fall brings pre-winter tune-ups. Both stretch schedules, though our pricing stays flat year-round. Labor is not priced by urgency at Flint Chimney Co Fort Worth.
Repair vs Replace: Which One Costs Less in Fort Worth?
On the crown side, a patch-and-seal repair runs $250 to $600. A full replacement runs $900 to $2,200. Patch work works when the cracking is hairline and the crown still has structural integrity. Once the concrete is spalling or the crown is separated from the flue, patching is money wasted.
On the cap side, if the cap is rusted through or the mesh is broken, replacement is nearly always the right call. Repairs to a cap (tightening bolts, replacing a screen, re-caulking the base) run $75 to $175 as an add-on to another service, but a full replacement is $300 to $700. When both need attention, most Fort Worth homeowners address them together. It saves a second trip and a second setup charge, and the crown is the most common cause of the leak anyway.
Fort Worth-Specific Factors That Wear Caps and Crowns Faster
Fort Worth sits on expansive clay soil. The ground swells after rain and shrinks during drought, which puts stress on every concrete slab and masonry structure. A chimney attached to a house sits on the same footing as the rest of the structure, so the same movement that cracks your sidewalk can crack your chimney crown. We regularly see hairline crown cracks in homes across the Westside and Oakhurst neighborhoods a few years after a dry summer cycle.
Then there’s the hail. Tarrant County gets an average of 3 to 5 significant hail events per decade. Galvanized caps dent. Copper caps dent worse, because the metal is softer. A dented cap usually still functions, but a dented lid with a broken weld can separate in a wind event. North Texas wind gusts routinely hit 40 to 50 mph in spring fronts, and a loose cap becomes a projectile. That’s a real safety concern, not a cosmetic issue.
Summer heat is the slower killer. A metal cap cycling between 100-plus-degree days and cooler nights expands and contracts at a rate the fasteners have to absorb. Cheap caps with thin gauge metal fail at the seams. That’s why Flint Chimney Co Fort Worth specifies professional-grade caps and crown materials by job rather than by margin.
What Materials Do We Use for Caps and Crowns in Fort Worth?
We install caps from brands designed for North American chimney work, including Gelco, Olympia Chimney, Famco, and Copperfield. These manufacturers build caps in standard flue sizes with proper mounting legs and cross brackets. A $40 box-store cap held on with a single clamp is not a professional installation. We install caps that bolt or screw to the flue tile, and we tool-caulk the base so wind-driven rain can’t work its way under the lid.
For crown work, we pour a custom mix with a slope that sheds water away from the flue, then tool the edges and seal the bond between the crown and the flue tile. We don’t use a flat pour, and we don’t let the crown touch the inside of the flue. Those two shortcuts are how crowns fail within a season. The crown has a drip edge formed into the underside so water drips off instead of running down the brick face.
How the Work Is Done: What to Expect on the Truck
Here’s how a cap and crown job goes at your Fort Worth home, start to finish.
- The call: A live person answers at (682) 255-2144 any hour of the day. We ask about your chimney’s age, the issue you’re seeing, and the type of roof and chimney access. Then we give you a ballpark on the spot, because a pricing guide should never require a house call.
- The inspection: We come out and inspect the crown, the cap, the flue, and the top courses of brick. If we find something else that affects the job, you hear it before we quote, not after we start.
- The written quote: Every Flint Chimney Co Fort Worth job gets a written price before any work starts. Scope, materials, price, and the 365-Day Done Right Promise are all on that sheet. The number on the invoice matches the number you approved. This is The Garrison Standard, the same code every Garrison Partners location follows.
- The work: A uniformed, background-checked technician does the job. We tarp the work area, keep the roof clean, and haul off old materials. No debris left in the gutter, no cigarette butts in the flowerbed.
- The follow-through: If a covered repair fails within one full year, we return at no charge. No argument, no deductibles, no fine print. That’s the home standard we’ve held since 2002 as part of the Garrison Partners family.
How to Save on Chimney Cap & Crown Work in Fort Worth
The biggest savings on chimney cap and crown work is catching the crown before it fails. A $300 crown patch today beats a $2,000 crown replacement and a $1,500 flue repair in two years. Water is the enemy, and a cracked crown is how water gets in.
Other practical ways to keep the cost down:
- Address cap and crown in one visit: Most of the labor cost is setting up safe roof access. Doing both at once saves a second trip charge and a second setup.
- Don’t over-buy the material: Stainless is the right call for most North Texas homes. Copper is beautiful, but you’re paying $800 to $1,600 for style, not function. If your house is a 1970s ranch in Ridglea, a steel cap does the job the same way.
- Get it inspected before you buy: A cap that doesn’t fit the flue is wasted money. We measure the actual flue dimensions. Box-store caps come in a few generic sizes, and if it doesn’t match your tile, it won’t seal.
- Keep the chimney on a schedule: An annual home chimney sweep and inspection catches crown and cap issues while they’re still small. A $200 sweep identifying a hairline crack beats a $2,000 emergency repair.
- Use the free estimate: We give free estimates in Fort Worth. Call (682) 255-2144 and get a written price before you commit. It costs nothing and the quote is yours to keep.
FAQs – Chimney Cap & Crown Cost in Fort Worth
How much does a chimney cap cost installed in Fort Worth?
A galvanized steel chimney cap installed runs $300 to $475, and a stainless cap runs $450 to $700 in Fort Worth. Multi-flue and custom caps start around $600 and can reach $1,200. The price includes measuring the flue, securing the cap with proper mounting hardware, and sealing the base. Call (682) 255-2144 for an exact quote on your flue size.
How much does it cost to replace a chimney crown in Fort Worth?
A poured concrete chimney crown replacement in Fort Worth typically runs $900 to $2,200. That includes removing the old crown, building a form, pouring a properly sloped crown, and curing it. A crown patch or seal runs $250 to $600 if the damage is minor. The exact price depends on chimney height, roof access, and how much of the old crown needs to be removed.
Is it cheaper to repair or replace a chimney crown?
Repair is cheaper upfront at $250 to $600, but only if the crown is structurally sound. If the crown is spalling, separated from the flue, or the cracks run deep, a patch will fail within a year or two. A replacement at $900 to $2,200 is the better long-term spend. We tell you which one applies to your chimney and write it into the quote so you can decide on the actual condition, not a guess.
Can you fix a chimney cap and crown the same day?
Yes, in most cases. Cap replacement is a same-day job. Crown replacement takes longer because the concrete needs to cure before we can tool and seal it, so a full crown replacement usually runs a day and a half including setup and cleanup. We schedule the work in a specific window and arrive inside it. Call (682) 255-2144 and we’ll give you a straight answer on timing for your chimney.
How long does a chimney cap last in Fort Worth’s weather?
A galvanized steel cap in Fort Worth lasts 5 to 8 years before rust through the seams. A stainless cap lasts 15 to 20 years. Copper caps last the longest but dent from hail, which is common in Tarrant County. The biggest factor after material is how well the cap is secured. A cap that rattles in the wind fails at the fasteners before the metal gives out.
What happens if I ignore a cracked chimney crown?
Water seeps through the crack, freezes and thaws through the winter, and widens the crack until the crown breaks apart. Once the crown fails, water runs down the flue and into the masonry. That’s when a $300 patch becomes a $2,000 crown replacement plus possible flue liner damage and brick repair. In Fort Worth’s freeze-thaw cycles, a small crown crack does not stay small.
The Garrison Standard: How Flint Chimney Co Fort Worth Prices This Work
Flint Chimney Co Fort Worth is part of the Garrison Partners family, founded in 2002. We operate under The Garrison Standard, a code that says every job gets a written price before work starts, every repair carries a written guarantee valid for one full year, and every technician on your property is background-checked and uniformed. The phone is answered by a live person 24/7, and the price on the sheet is the price you pay. Those aren’t marketing lines. They’re how we’ve run since day one, and they apply to every cap or crown job we estimate in Fort Worth.
The materials we use are names you can verify independently: Gelco, Olympia Chimney, Famco, and Copperfield for caps, and specification-grade concrete with a proper water-shedding slope for crowns. When a liner is part of the repair scope, we work with DuraFlex and HeatShield systems. We don’t substitute cheaper product to pad the margin.
If a covered repair fails within the 365-day guarantee period, we return at no charge. No revisits billed, no diagnostic fees, no argument. That’s what a written guarantee means at Flint Chimney Co Fort Worth.
Get a Free Estimate in Fort Worth
If you need a chimney cap, a crown repair, or both, call (682) 255-2144. A live person answers around the clock, and we’ll walk through what you’re seeing, give you a ballpark on the spot, and schedule a free inspection if you want written numbers tied to your specific chimney. The estimate costs nothing and carries no obligation. The price we write is the price you pay.
Pricing reflects the Fort Worth market as of 2026. Flint Chimney Co Fort Worth offers free estimates – call (682) 255-2144.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Fort Worth since 2002.
What Our Customers Say
"Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Good work on the damper replacement. Had to wait for a part for a few days, but they stayed in touch."
- Glenn D."Chimney repair on loose bricks near the top. Tuckpointed it so it matches. Looks right."
- Rosa H.