Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Fort Worth, TX | Flint Chimney Co Fort Worth
We clean, inspect, and repair DuraFlex chimney liners across Fort Worth as an independent service provider, not a manufacturer-authorized dealer. The thing that makes our DuraFlex work here different is simple: we see how Fort Worth’s hail, humidity, and those odd “witch’s crook” bends actually damage liners, and we write down exactly what we find before recommending anything. If your DuraFlex liner hasn’t been looked at in a few years, call (682) 255-2144 and we’ll come take a straight look. Hank Delano runs the crew, and he doesn’t soften a diagnosis.
Why Fort Worth Residents Choose Us for DuraFlex Service
Plenty of chimney companies can sweep a liner. Fewer actually know DuraFlex 316L from Pro 316Ti, or why that matters when a Fort Worth hailstorm has dented your rain cap. That’s where a Chimney Sweep in Fort Worth who knows the hardware makes the difference. Our crew has pulled DuraFlex liners from 1920s brick bungalows in Fairmount and from factory-built setups in far north Fort Worth, and the failure points are rarely the same. We carry OEM DuraFlex caps, tees, and connectors because the gauge and crimp profile match exactly, which means fewer leaks and better draft after the repair.
Hank learned the chimney trade at Los Angeles Trade-Technical College and put in nearly twenty years of full-time work before bringing the crew to Fort Worth. He’s known for level inspections: what he sees in the flue is what you hear, nothing padded. Our DuraFlex sales & service work runs on the same principle. If you’re in Fort Worth and your liner is older than 2015, a camera inspection is the shortest path to knowing whether you have a clean liner or a problem waiting for the next freeze.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Fort Worth
- Creosote glaze trapped at the witch’s crook bend. In older Fort Worth neighborhoods, many chimneys have a bend at the top to shed rain. That bend traps creosote in ways a straight flue never will, and DuraFlex liners don’t change that geometry. We use a rotating nylon brush and creosote solvent to break the glaze without scoring the liner wall.
- Hail-dented rain caps on DuraFlex 316L systems. Fort Worth sits in Tornado Alley, and hail dents caps inward until they restrict draft or let rain straight down the flue. We replace damaged caps with OEM DuraFlex high-wind models sized to the liner, not a universal cap that wobbles in a north wind.
- Corrosion at the liner-to-appliance connector. In newer far north Fort Worth subdivisions, factory-built wood-framed chimneys often have DuraFlex specified from the start. The weak link there is the connector at the appliance, where heat cycling and humidity rust the joint. We inspect that connection on every cleaning, camera first.
- Freeze-thaw cracking at the crown and top plate seal. Fort Worth winters dip below freezing often enough to work mortar joints loose. On retrofitted DuraFlex installs in pre-1940 homes, the top plate and crown sealing fail before the liner does. We repoint crowns and reseal top plates before they let water behind the liner.
- Warped aluminum liners from the 1990s. Older DuraFlex aluminum liners in Fort Worth homes from that era have had thirty years of hot, humid summers working on them. Aluminum warps and separates. We’ll tell you plainly if an aluminum liner is past safe service and needs replacement with 316L or Pro 316Ti.
DuraFlex Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s something that’s true in Fort Worth and not in, say, Plano or Arlington. Ryan Place and Fairmount are full of brick bungalows built before 1940 with unlined flues. When a DuraFlex liner is present in those homes, it was almost always installed as a retrofitted upgrade decades after the house went up, not as original equipment. That changes where failures happen. The liner itself is usually sound; what fails is the top plate sealing and the crown around it, because the retrofit had to adapt to an old masonry chimney that was never designed for a liner. We’ve pulled sections from homes on College Avenue where the crown wash had cracked along the liner’s edge and let water run behind the top plate for years. Contrast that with far north Fort Worth, where DuraFlex is often factory-specified in wood-framed chimneys, and the liner-to-appliance connector is the part that wears first. If you own a pre-war Fort Worth bungalow with a liner, the smart money is on checking the crown and top plate, not the liner body.
Last March, after a hailstorm hammered Ryan Place, our tech pulled a 6-inch DuraFlex 316L liner from a 1926 bungalow to find the rain cap dented inward and the liner’s top corrugation sheared right at the crown. That house had a witch’s crook bend just below the cap, so we dropped a weighted cable and worked a rotating nylon brush with creosote solvent through the trapped glaze. Then we replaced the cap with an OEM DuraFlex high-wind model, repointed the crown wash, and ran a Level 2 camera inspection to confirm nothing behind the liner had cracked. That’s the job done right, and it’s what our Fort Worth service area work looks like when it matters.
DuraFlex Models & Products We Service in Fort Worth
We service the full DuraFlex product range: 316L Stainless Steel Chimney Liner, Pro 316Ti Alloy Liner, Aluminum Liner, and Smooth Wall Liner. For repairs, we use OEM DuraFlex caps, tees, and connectors when they’re available because the gauge and crimp profile match exactly, which cuts down on leaks and draft problems after the fact. Routine consumables like fasteners and sealant we source from quality aftermarket equivalents. But we won’t patch a corroded liner joint with a universal coupler, that’s a full section replacement or liner removal, full stop. We keep common OEM parts stocked on the truck so most Fort Worth repairs happen same-visit, not two weeks later.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Fort Worth
A standard chimney cleaning in Fort Worth runs $180 to $340 depending on liner length, creosote condition, and access. If there’s a witch’s crook bend, add some labor time for the extra passes. A DuraFlex cap replacement with an OEM cap runs $160 to $380 installed. Crown repair and resealing runs $300 to $700 depending on how much masonry has spalled. Every job gets a written price before any tool comes off the truck, and every repair carries our 365-Day Done Right Promise: if a covered repair fails within a year, we come back free. Call (682) 255-2144 for a free estimate and we’ll put the number in writing.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Fort Worth
No, the liner stays in place. The bend makes cleaning slower because creosote collects at the crook, but we work a weighted cable and rotating nylon brush through it from above with a creosote solvent. Removal only comes up if the liner itself has failed, and you’ll see proof on camera before we recommend that.
Usually you can repair it. A dented rain cap gets replaced with an OEM DuraFlex high-wind cap. If the top corrugation is sheared, we cut and replace the damaged section and reseal the top plate. Whole-liner replacement is a last resort, and we’ll show you camera footage before we ever put it on the table.
Aluminum liners are rated for gas appliances, not wood-burning fireplaces. If it’s been carrying wood smoke for thirty years, it’s likely warped and separating. We’ll camera it during your next sweep and tell you what it actually shows. The remedy, if needed, is a 316L or Pro 316Ti replacement. Call (682) 255-2144 to schedule a look.
A proper liner makes it safer, but the liner isn’t the whole story. You still need a Chimney Inspection in Fort Worth to check the crown, top plate, and any masonry behind the liner. A 1920s brick chimney with a good liner can still have cracked mortar or a failing crown. The liner solves one problem; it doesn’t cancel the others.
Two factors. If your chimney has a witch’s crook bend, creosote collects at that bend faster than in a straight flue. And if you’re burning unseasoned wood or running fires low and slow, that adds deposits. It’s rarely the liner’s fault. We’ll show you what the buildup looks like on camera and tell you exactly what’s feeding it. For a Fort Worth-specific answer, call (682) 255-2144 and we’ll walk you through it.
Service Areas Near Fort Worth
We serve Fort Worth and the surrounding communities, including North Richland Hills, Haltom City, Watauga, Southlake, and Hurst. If you’re in one of those areas and need DuraFlex service in North Richland Hills or DuraFlex service in Haltom City, we bring the same written pricing and camera-first diagnostics to your door.
Book Your DuraFlex Service in Fort Worth Today
If it’s not clean and it’s not safe, we’re not done. That’s how Hank runs the crew, and that’s how we’ve handled DuraFlex liners across Fort Worth for years. Call (682) 255-2144 for a free estimate, and we’ll send a background-checked, uniformed tech with the right parts already on the truck.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Fort Worth since 2002.