Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLevel 2 Inspection in Fort Worth, TX
A Level 2 chimney inspection in Fort Worth typically costs between $250 and $450, and it’s the inspection you need when something about your chimney has changed. That means a new appliance hookup, a weather event that hit your roof and chimney hard, a house fire, an earthquake, or any time you’re buying or selling a home. Our team at Flint Chimney Co Fort Worth performs Level 2 inspections using internal video scanning equipment so you see exactly what we see before a single repair is recommended. Call (682) 255-2144 to schedule one, and we’ll put the price in writing before any work begins.
If you already know you just need a standard Chimney Cleaning & Sweep in Fort Worth, we handle that too. A Level 2 inspection is a different job, and it’s worth knowing when it’s required.
When You Need a Level 2 Inspection
Most homeowners in Fort Worth only ever hear about Level 1 inspections, the once-a-year visual check that goes with a routine sweep. Level 2 is more involved, and it’s triggered by specific situations. Here’s when the National Fire Protection Association (NFPA 211) says you need one:
- You’re buying or selling a home. Real estate transactions in Tarrant County increasingly require a Level 2 inspection before closing. Lenders and inspectors want proof the flue isn’t hiding a problem that’ll cost the new owner thousands.
- A severe weather event hit your roof. North Texas hail and straight-line winds damage chimney crowns, flashing, and brickwork. If your roof took a beating in a storm, the chimney likely did too. A Level 2 inspection checks for hidden cracks and shifted flue tiles.
- You’ve had a chimney fire. Even a small chimney fire can crack flue tiles or warp a metal liner. After any fire, the chimney must be inspected before you use it again. No exceptions.
- You’re changing the appliance or fuel type. Swapping a wood-burning fireplace for a gas insert, or adding a new furnace or water heater that vents through the chimney, changes the demands on your flue. A Level 2 inspection verifies the existing flue can handle it.
- The chimney has been dormant for years. Old chimneys in Ridglea Hills, Wedgwood, and Arlington Heights often have hidden deterioration from decades of moisture and disuse. We regularly find spalled brick and failed mortar that a visual-only check misses.
- Something feels off and you can’t identify it. Odd smells, drafting problems, or water stains near the hearth can all signal issues a Level 2 is designed to find.
Our Level 2 Inspection Process
Every Level 2 inspection we perform follows The Garrison Standard, the same operating code every Garrison Partners location follows since 2002. That means a written price before work starts, a documented scope, and a full report when we’re done. Here’s what happens on the day of your inspection:
- Exterior inspection of the full chimney structure. We walk the roofline and inspect the crown, cap, flashing, brick, and mortar. In Fort Worth’s freeze-thaw cycle, minor cracks become major ones fast, and we document every one of them.
- Attic and crawl space access check. A Level 2 inspection requires us to check accessible areas where the chimney passes through the house. This is where hidden gaps and fire hazards tend to live.
- Interior flue scan with a video camera. We run a specialized chimney camera through the full length of the flue. You see the footage. We explain what it shows. No mystery, no vague warnings.
- Appliance and connector evaluation. We check how your furnace, water heater, or insert connects to the flue and verify clearances meet current safety code.
- Written report with photos and video clips. You’ll have a written record of our findings, with images, for your insurance, your real estate agent, or your own file. If repairs are needed, the price is itemized in writing before you decide anything.
We work with professional-grade materials on every repair we recommend: DuraFlex for relining applications, HeatShield for flue resurfacing, and Copperfield for chimney caps and chase covers. The material is specified by the job, never by margin.
Level 2 Inspection Pricing in Fort Worth
A Level 2 inspection in the Fort Worth market generally runs $250 to $450, depending on roof accessibility, chimney height, and how many flues need scanning. That price includes the full written report and video documentation. If a repair is needed, you’ll see the repair quote separately, in writing, before anything is scheduled.
Here’s what affects the cost:
- Number of flues. Some homes run a furnace and a fireplace through the same chimney on separate flues. Each flue must be scanned individually.
- Roof access. A steep or high roof pitch in areas like Monticello or Rivercrest takes longer and requires more safety rigging.
- Property age. Pre-1960 brick chimneys in the Fairmount and Ryan Place historic districts often need more careful handling, and the inspection may take longer.
- Scope of documentation. Real estate transactions often require a specific report format for lenders and buyers. We handle that documentation at no extra charge.
Every Level 2 inspection includes a written guarantee on any repair we perform, valid for one full year under our 365-Day Done Right Promise. If a covered repair fails within that window, we return and fix it at no charge. That guarantee, like the price, is in writing before any tool comes off the truck.
FAQs – Level 2 Inspection
How much does a Level 2 chimney inspection cost in Fort Worth?
A Level 2 chimney inspection in Fort Worth typically costs between $250 and $450. The final price depends on roof access, the number of flues, and the age of the chimney. We give you a written price before the inspection starts, so there are no surprises on the invoice. Call (682) 255-2144 for an exact quote specific to your home.
How long does a Level 2 inspection take?
Most Level 2 inspections take 60 to 90 minutes, depending on roof access and the condition of the chimney. If we find damage that needs a closer look, the inspection may run longer, but you’ll know that before we proceed.
Is a Level 2 inspection required when buying a house in Fort Worth?
Yes, in most cases your home inspector or lender will flag the chimney and require a Level 2 inspection before the sale closes. We provide a written report with video documentation that meets the standards lenders and real estate agents in Tarrant County expect.
What’s the difference between a Level 1 and Level 2 inspection?
A Level 1 inspection is a visual check of the chimney’s accessible parts and is typically done alongside a routine sweep. A Level 2 involves camera scanning of the full flue, access to attics and crawl spaces, and a detailed written report. Level 2 is required when there’s been a change to the system, a severe weather event, or a real estate transaction.
Will I need a Level 2 inspection every year?
No. Most homeowners need a Level 1 inspection with their annual Chimney Cleaning & Sweep in Fort Worth. A Level 2 is only required when a specific event triggers it: a home sale, a chimney fire, a major storm, or a change in appliance or fuel type.
Can you come today for a Level 2 inspection?
We schedule based on availability, but a live person answers our phone 24/7 and can tell you the soonest opening. Call (682) 255-2144 and we’ll get you on the schedule as quickly as possible.
What a Level 2 Inspection Catches That a Level 1 Misses
A visual-only inspection sees the accessible surfaces. A Level 2 sees inside the flue itself. In Fort Worth homes, we regularly find three problems that a Level 1 would pass right over:
- Cracked flue tiles. Clay tile liners crack from chimney fires, settling, and weather stress. Once cracked, heat and carbon monoxide can reach combustible framing. A camera catches it. A flashlight doesn’t.
- Missing or deteriorated mortar between flue tiles. The joints between clay tile sections erode over decades, creating gaps where gases leak. This is invisible without a camera scan.
- Improperly installed liners from previous repairs. We’ve seen DIY liner jobs and cut-rate contractor work in neighborhoods across Fort Worth that leaked gases into wall cavities. A Level 2 inspection documents it so it can be corrected.
When a liner needs replacement, we specify the right material for the job. DuraFlex for most gas and oil applications, HeatShield for restoring damaged clay liners without a full tear-out, and Gelco for specific masonry repair needs. We don’t sell you a brand because it’s in stock. We specify the material that matches the appliance and the flue condition.
Why Fort Worth Homeowners Call Flint Chimney Co for Level 2 Inspections
Our principles are simple and they’re written down. The Garrison Code is the operating standard we follow on every job: document the condition, price the work before it starts, and guarantee what we repair. That means you never have to wonder whether the number on the invoice will match the number you approved. It will.
Hank Delano leads the crew at Flint Chimney Co Fort Worth, and the standard he holds is the same one applied across every Garrison Partners location since 2002. Background-checked, uniformed technicians arrive inside the window you’re given. A live person answers the phone 24/7. And if a covered repair fails within the first year, we return at no charge under the 365-Day Done Right Promise. That’s not a sales pitch. It’s the written guarantee that comes with every repair we perform.
If you’ve got a home sale closing, a chimney that’s been through a storm, or an appliance change in the works, schedule a Level 2 inspection today. Call (682) 255-2144 and we’ll give you a free estimate and a written price before the job starts. When you call, a live person answers.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Fort Worth.