Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Fort Worth
A chimney inspection in Fort Worth typically runs $189 – $449 depending on the level, with a Level 2 camera inspection as the most common choice for rural properties and older homes. We serve the entire Fort Worth metro with written pricing before any work starts, and you can reach us at (682) 255-2144. If you heat with a wood stove in Parker County or on the fringes of Fort Worth, your inspection schedule and creosote loading are different from someone burning an occasional fireplace fire in TCU’s neighborhood. We plan for that difference.
Flint Chimney Co Fort Worth is part of the Garrison Partners family, serving Fort Worth homeowners since 2002. Every inspection follows a documented scope, and every repair carries our 365-Day Done Right Promise in writing. Hank Delano leads our Fort Worth crews, and he holds every technician to The Garrison Standard: no work begins until you have a written price in hand.
Why Flint Chimney Co Fort Worth Is Fort Worth’s Preferred Chimney Inspection Company
Fort Worth homeowners call us because we show up with a defined scope and a flat price, not a rough guess and a surprise invoice. Our Chimney Inspection team performs Level 1, Level 2, and Level 3 inspections according to NFPA 211 standards, and we document everything with camera footage you can see yourself. No one leaves the job wondering what they paid for.
We dispatch from the brand’s Dallas-Fort Worth office, so scheduling in Fort Worth is same-week in most cases. Technicians are background-checked and uniformed. The person who calls you back is a live human, any hour, any day. That matters when you find water staining your ceiling at 9 p.m. after a storm rolled through Tarrant County.
- Written price before work starts: no verbal estimates that drift at the door.
- 365-Day Done Right Promise: every repair carries a one-year written guarantee; if it fails, we return at no charge.
- Camera documentation included: you see what we see, whether it’s creosote, a cracked flue tile, or rust in a prefab chimney.
- Brand-specified materials: we stock DuraFlex, HeatShield, Olympia Chimney, and Famco parts for Fort Worth jobs, so repairs don’t wait on a warehouse.
Styles & brands we work with
Chimney Camera Inspection in Fort Worth
Chimney Camera Inspection in Fort Worth is a video scan of the entire flue system from the firebox to the chimney cap, and it runs $249 – $429 depending on the structure. We use a high-resolution camera head that shows us exactly what a visual-only look from the rooftop misses: hidden creosote, cracked clay tiles, rust-through in metal liners, and separated mortar joints. For Fort Worth homes with wood stoves as a primary heat source, this is the inspection that actually tells you whether your liner is safe to burn another winter.
Level 2 Inspection With Camera
A Level 2 inspection is required by code when you’re buying or selling a home, after a chimney fire, or after any severe weather event. In Fort Worth, hail is a recurring event. When a storm dents a chimney cap or cracks a crown, you need eyes inside the flue to confirm nothing shifted. We include the full camera scan as part of every Level 2, and we hand you the video file when we finish.
Flue Inspection
Flue inspection covers the inner passage where smoke and gases travel. On a rural property near Crowley, our crew drove out for what the homeowners thought was a routine sweep. The camera caught heavy second-degree creosote packed into the smoke chamber and a chimney crown cracked by a spring hailstorm. That’s a flue inspection earning its price: the crown damage went to their insurer, and the creosote got chemically treated before it could ignite.
Fireplace Inspection in Fort Worth
Fireplace Inspection in Fort Worth covers the firebox, damper, hearth, and the first several feet of flue, and it runs $189 – $319 as a standalone service. We check for cracked firebrick, warped dampers, improper clearance to combustibles, and creosote loading that’s reached the point where a fire becomes a liability. If you burn occasionally in a Ryan Place bungalow, this is often the right starting point before deciding if a full camera scan is warranted.
Real Estate Inspection
When you’re closing on a home in Fort Worth, a chimney inspection is not optional fluff. Buyers in Fairmount or North Hi Mount often discover unlined flues or deteriorating mortar during the option period, and the seller’s disclosure rarely mentions it. We provide a written report with photos that works for negotiations and gives you a real repair number, not a vague “needs work” note.
Level 1 Inspection
A Level 1 inspection is the basic visual check for a chimney that’s been in continuous use with no changes. We confirm the flue is clear, the cap is intact, and there’s no obvious structural movement. It’s the right call for a newer home in far north Fort Worth where the prefab chimney has been used seasonally and nothing about the system has changed. If it’s your first inspection in years, we’ll usually recommend stepping up to a Level 2 for the camera documentation.
For Rural Fort Worth Properties: Wood Stoves Load Different
Here’s what a rural Fort Worth property teaches you that a generic chimney guide doesn’t. Wood stoves run as primary heat, not ambience. That means daily loads, long burn cycles, and far heavier creosote loading than an occasional fireplace fire. Our crews see second-degree creosote buildup in a single season on rural properties around Crowley and the western edges of Fort Worth, where homeowners burn whatever wood they can get cheap. Green oak and hackberry smolder at low temperatures. That produces sticky, tar-like creosote that a standard brush won’t remove.
The safe sweeping interval for a daily-burning wood stove in this part of Texas is every 60 to 90 days during burn season, not once a year. If you’re driving your stove hard from November through February, you should be scheduling three or four visits in that window. We don’t upsell this. It’s how you prevent a chimney fire in a house where the chimney is the only heat source between you and a freezing night.
The drive is longer, too. Fort Worth isn’t Sherman or Wichita Falls, but once you’re past Loop 820 on the west side, service response changes. We schedule rural calls on the same route to keep your cost fair, and we carry common parts, Copperfield caps, Famco dampers, DuraFlex liner sections, on the truck so one visit handles most findings.
Common Chimney Inspection Problems We See in Fort Worth Homes
- Unlined flues in older brick bungalows. Ryan Place and Fairmount homes built before 1940 often have open brick flues with no clay liner. First-degree creosote works into the mortar, and Fort Worth’s freeze-thaw cycles spall the masonry from the inside out.
- Rusted prefab chimneys in far north Fort Worth. Summer humidity here sits around 60% or higher for months. Factory-built metal chimneys rust through where the pipe sections join, and a draft failure follows. Only a camera inspection catches it before you get smoke pushback.
- Witch’s crook bends on historic chimneys. The curved top on some older Fort Worth chimneys was built to keep rain out. It also traps creosote so thick that a standard brush leaves third-degree tar glaze behind. We flag these for chemical treatment during inspection.
- Corroded flashing hidden by roofing layers. Post-war ranch homes, and there are thousands of them across east and south Fort Worth, often have original flashing around the chimney chase. Hail storms loosen it. A visual inspection from the ground misses it entirely; the camera shows where the next roof leak starts.
See the difference
Before
After
Before
After
Before
AfterTrusted Brands We Service in Fort Worth
We inspect and repair chimneys built with Olympia Chimney, Famco, Copperfield, and DuraFlex components. These aren’t generic parts; they’re the liners, caps, and dampers we specify for Fort Worth homes based on what the camera shows, not what’s easiest to stock. When a rural wood stove system with a DuraFlex liner needs a section replaced, we carry the correct diameter on the truck. If a hail storm takes out a Copperfield cap on a Fairmount bungalow, we don’t make you wait two weeks for shipping. Our supply pipeline runs through the Dallas-Fort Worth metro, which means Fort Worth customers see faster turnaround than most of the state.
Fort Worth’s Weather and Housing Stock: What It Does to Your Chimney
Fort Worth sits in Tornado Alley, and that’s not a throwaway line. It shapes how often this city’s chimneys get inspected. Hail and high winds are a routine part of spring in Tarrant County. A cap dented by hail or a crown cracked by wind pressure changes how your chimney performs, and your insurance company will want documentation. We photograph storm damage during every inspection we do here. That’s a regular part of the trade in Fort Worth in a way it isn’t in Arlington, where storm impacts on chimneys are less pronounced.
Add the heat to that. Fort Worth summers run 95-plus for weeks, and the humidity doesn’t break. Metal flues rust. Masonry expands. Winter brings freeze-thaw cycles that crack the same mortar summer heat dried out. The result is a city where chimneys age faster than homeowners expect, and where a visual once-over from the ground is not an inspection.
Pricing for Chimney Inspection in Fort Worth, TX
A Level 1 inspection in Fort Worth runs $189 – $249. A Level 2 with camera runs $249 – $429, and a Level 3 inspection, which involves removing portions of the chimney structure to access hidden areas, starts at $449 and is quoted per job because it’s invasive. Fireplace-only inspections run $189 – $319. The variables are access, height, condition of the existing cap, and whether we’re also documenting storm damage for insurance. You get the written price before we start. Every time. Call (682) 255-2144 for an exact quote; estimates are free, and the number you approve is the number you pay.
We Also Serve Cities Near Fort Worth
Our Fort Worth crews also cover Haltom City, North Richland Hills, Hurst, and Crowley. If you live outside the Fort Worth loop but still in Tarrant County, call us at (682) 255-2144 and we’ll tell you honestly whether we’re the right fit for your location. Rural property owners around Crowley and farther west should mention their wood stove setup when they call so we can bring the right camera and parts. For the full picture of our service area, see Chimney Inspection in Fort Worth.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Fort Worth
You need an annual Level 1 at minimum, even in an occasional-burn fireplace, because Fort Worth’s freeze-thaw cycle and summer humidity damage masonry and metal even when you’re not burning. Occasional burning creates first-degree creosote you can’t see from the hearth. An annual inspection catches deterioration before it becomes a repair. If you have a wood stove as primary heat on a rural property, schedule inspections every 60 to 90 days during burn season instead. Call (682) 255-2144 and Hank Delano’s team will set the right schedule for your setup.
Because you burn more, and often with wetter or greener wood, and at lower temperatures over longer cycles. Rural properties outside Fort Worth frequently rely on wood heat daily, not recreationally. The fuel load is simply bigger. In-town fireplaces burn a few evenings a week for ambience; your stove is running hard overnight. That gap in burn hours explains the creosote difference, and it means your inspection and sweeping schedule should be measured in months, not years. We can calibrate that with a Level 2 camera check.
A camera inspection shows the entire flue from firebox to cap, including hidden creosote, cracked clay tiles, rust perforation in metal liners, separated mortar, and animal nesting. A visual sweep confirms the flue is clear. The camera shows whether the liner is still safe to use. In Fort Worth, that’s the difference between approving a wood stove for another winter and finding a crack that would have started a chimney fire. The video file is yours to keep.
Fort Worth’s summer humidity, routinely above 60%, drives moisture into every seam and joint of a prefab metal chimney. The heat accelerates oxidation, and rust works through pipe walls in a few years. The failure mode is a draft collapse: smoke stops rising and pushes back into the house. A camera inspection catches rust perforation before that happens. If we find it, we’ll show you the footage and quote a DuraFlex replacement at a written price before any work begins.
That bend is called a witch’s crook, and it’s a local architectural feature designed to keep rain out of the flue. It works for water, but it traps creosote in a space a standard brush can’t reach. In older Fort Worth neighborhoods like Ryan Place and Fairmount, we regularly find thick tar glaze behind witch’s crooks that other sweeps miss. Inspection requires either a flexible brush or chemical treatment, and we’ll note that in your written report before recommending anything. Call (682) 255-2144 to schedule.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Fort Worth since 2002.