Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Fort Worth, TX | Flint Chimney Co Fort Worth
HeatShield chimney cleaning in Fort Worth typically runs $189 – $389 depending on flue condition, and we provide independent HeatShield service across the city without factory authorization. What makes our HeatShield work here different is simple: we’ve cleaned, repaired, and resurfaced enough Fort Worth flues to know exactly how the witch’s crook bends on pre-1950 chimneys trap creosote and complicate every cerfractory application. Flint Chimney Co Fort Worth is a HeatShield sales & service provider that works on the material daily, and we put every price in writing before we start. Call (682) 255-2144 for a free estimate.
Why Fort Worth Residents Choose Us for HeatShield Service
We’re not the manufacturer. We’re not a franchise. We’re an independent chimney company that has applied HeatShield cerfractory flue sealant to hundreds of Fort Worth chimneys, from 1920s Fairmount brick stacks to 1970s metal flues up in far north subdivisions. That means we’ve seen how HeatShield bonds, how it cures, and how it fails in North Texas heat, humidity, and hail. We know the material the way a mechanic knows an engine, not the way a brochure writer knows a product line.
Hank Delano, our owner, learned the chimney trade at Los Angeles Trade-Technical College and put in close to two decades doing the work before he ever hung a Flint sign. He and our crew have spent years inside Fort Worth flues, including a solid stretch of jobs in the Fairmount Historic District where century-old fireplaces demand careful hands. We quote HeatShield work the same way Hank runs a Chimney Inspection - Fort Worth: tell you exactly what we see, nothing added, nothing softened. Every job gets a written price before any tool comes off the truck, and every repair carries our 365-Day Done Right Promise in writing for a full year.
Styles & brands we work with
Common HeatShield Chimney Cleaning Problems We Solve in Fort Worth
- Spalled HeatShield parging at the smoke shelf in unlined 1920s brick flues. Decades of Fort Worth freeze-thaw cycles crack the original cerfractory. When it spalls away, raw brick is exposed and creosote seeps into the mortar joints. We clean the shelf by hand, then reapply HeatShield Joint Repair where the ceramic layer has failed.
- CeCure sleeve separation at the flue offset on prefab metal chimneys. Far north Fort Worth homes sit on expansive clay soil, and slab movement shifts the metal liner. That shift separates the HeatShield CeCure sleeve at the offset, letting flue gases bypass the ceramic layer. We identify the separation during cleaning and reseal it before it becomes a draft or smoke problem.
- Cracked HeatShield crown coating after hailstorms. Fort Worth sits in Tornado Alley, and hail is a regular part of spring. Impact dents and cracks the cerfractory at the flue termination, and water gets behind the HeatShield layer. That causes efflorescence on interior walls within a season. We replace the crown coating and check the flue interior for moisture damage.
- Hairline thermal cracks on large masonry flues in Ryan Place bungalows. Humid Fort Worth summers expand the cerfractory surface. On double-sided fireplaces with big flues, that expansion creates a fine spiderweb of hairline cracks. We evaluate whether the cracks are cosmetic or structural, then seal or resurface accordingly.
- Creosote buildup trapped at the witch’s crook. Pre-1950 Fairmount and Ryan Place homes often have a bent flue tile at the crown to keep rain out. The bend traps creosote and blocks the HeatShield nozzle from reaching the back side. We hand-scrape that section before any cerfractory resurfacing, because HeatShield will not adhere to a dirty surface.
HeatShield Service in Fort Worth: What Local Conditions Mean for Your Equipment
The witch’s crook is the detail that separates Fort Worth HeatShield work from any other market. In older neighborhoods like Fairmount and Ryan Place, chimneys built before 1950 often have a bent flue tile at the crown, an architectural quirk meant to keep rain out in an era before chimney caps were standard. The bend traps creosote where the flue changes direction, and that changes how HeatShield application has to happen. A standard cerfractory resurfacing uses a spinning nozzle that sprays the sealant onto the flue walls. The nozzle cannot reach the back side of the crook. Spray HeatShield on a dirty crook and the cerfractory will debond within a season, taking creosote with it and leaving the flue looking worse than before we started. So our crews hand-clean the bend first, always. It’s slower, it’s dirtier, and it’s the only way the material actually holds in a Fort Worth witch’s crook.
On a 1938 bungalow off 8th Avenue in Fairmount, our tech pulled a HeatShield lining that had debonded right at the crook. Behind it sat a hidden creosote plug the homeowner had been smelling on windy days. We hand-scraped the bend, applied HeatShield Joint Repair to seal the exposed mortar, then resurfaced the lower flue. The draft held steady even during a March thunderstorm. That’s the difference between knowing HeatShield and knowing HeatShield in Fort Worth. If it is not clean and it is not safe, we are not done.
HeatShield Models & Products We Service in Fort Worth
We work on the full HeatShield product line. The HeatShield Cerfractory Flue Sealant is the standard mortar-based system for resurfacing masonry flues. The HeatShield Joint Repair System seals failed mortar joints without a full resurfacing. The HeatShield Resurfacing System rebuilds the interior flue surface when the original liner has degraded. And the HeatShield CeCure sleeve and parging system lines prefab metal chimneys with a ceramic layer that handles thermal shock better than bare metal. We stock genuine HeatShield materials for fast Fort Worth turnaround, because the cerfractory mix and CeCure sleeves are specific to the system. Generic refractory mortar does not have the same adhesion or expansion coefficient, and we will not use a substitute on a HeatShield flue. If the liner is delaminating over more than 30% of the flue area or the underlying masonry is crumbling, we will tell you a patch won’t hold and recommend a full rebuild or a rigid stainless liner instead. Hank’s rule: if it’s not going to stay, we don’t sell it.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Fort Worth
A standard Chimney Sweep in Fort Worth with HeatShield flue inspection typically runs $189 – $389. HeatShield Joint Repair work starts around $450 and goes up based on how many feet of flue need sealing. A full HeatShield Resurfacing System on a single-story masonry chimney runs $2,400 – $4,200. CeCure sleeve installation on a prefab metal chimney starts near $3,500. Creosote removal in a witch’s crook flue adds time, and we quote it as part of the sweep rather than as a surprise line item. Crown repair and chimney waterproofing are separate quotes, always in writing before any work starts. Every estimate is free, and the number you approve is the number on the invoice. Call (682) 255-2144 for an exact quote on your Fort Worth chimney.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Fort Worth
Yes, and those chimneys are exactly what HeatShield was designed for. Unlined brick flues absorb creosote into the mortar joints every time you burn a fire, and over decades that creosote becomes a fire hazard. HeatShield Cerfractory Flue Sealant coats the brick with a ceramic layer that seals the pores and creates a smooth, insulated flue surface. On Fort Worth’s unlined 1920s chimneys, we clean the brick thoroughly first, then apply the HeatShield resurfacing system. The result is a flue that holds heat better and doesn’t allow creosote to soak into the masonry. If the brick is crumbling beyond repair, we will tell you that before we sell you a liner. Call (682) 255-2144 for a free flue inspection.
Usually yes, but the crown crack has to be fixed first. A cracked crown lets water run down between the flue tile and the chimney structure, and that moisture can debond HeatShield that’s already in the flue or degrade mortar joints that have never been sealed. We replace or recoat the crown, then evaluate what the flue interior looks like. If smoke is backing up, there’s likely creosote or structural damage inside, not just at the top. HeatShield resurfacing addresses the flue liner, and crown repair addresses the water entry point. Both have to be right before the smell goes away. Call (682) 255-2144 and we’ll inspect the crown and flue together.
On a properly prepared prefab metal flue, HeatShield resurfacing can last 20 years or more. The bigger question in far north Fort Worth is what’s happening to the metal liner underneath. Expansive clay soil shifts with moisture, and that movement stresses the flue joints. If the metal liner has pulled apart at an offset, no ceramic layer will hold long-term. We inspect the prefab system before recommending HeatShield. If the liner is stable, HeatShield CeCure extends its life significantly. If the liner has shifted, we’ll tell you and recommend replacement before talking about resurfacing. Call (682) 255-2144 for an honest read on your prefab chimney.
No. Removing the crook is invasive, expensive, and almost never necessary. What’s necessary is cleaning it by hand before the HeatShield goes in. The spray nozzle cannot reach the back side of the bend, so the creosote has to come off manually. Our techs use wire brushes and scraping tools to get the crook clean, then apply HeatShield Joint Repair to any exposed mortar before resurfacing the lower flue. We’ve done this on dozens of Fairmount and Ryan Place homes without removing a single flue tile. The crook stays, the creosote goes, and the HeatShield holds.
It depends on where the crack is and how severe it is. HeatShield Joint Repair can seal hairline cracks in flue tiles, and the cerfractory material handles the heat from a gas log set without issue. But if the tile is shattered, shifted, or the crack runs through multiple tiles, HeatShield is not enough. Gas fireplaces run cooler than wood fires, but they still produce flue gases that need containment. We’ll inspect the flue with a camera, show you what we see, and recommend the repair that actually fits the condition. Call (682) 255-2144 to schedule an inspection.
Service Areas Near Fort Worth
We provide HeatShield chimney cleaning and repair throughout the Fort Worth service area, including Fairmount, Ryan Place, and the far north subdivisions. We also cover HeatShield service in North Richland Hills and HeatShield service in Haltom City, along with Watauga, Southlake, and Hurst. If you’re within a 30-minute drive of Fort Worth, we can get to you.
Book Your HeatShield Service in Fort Worth Today
If your Fort Worth chimney needs a sweep, a HeatShield inspection, or a full resurfacing, call (682) 255-2144. We’ll schedule a time, show up in uniform, and put the price in writing before any work starts. If it’s not done right, our 365-Day Done Right Promise covers it for a full year.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Fort Worth since 2002.