Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in Fort Worth?
A standard chimney sweep in Fort Worth runs $149 to $275 for a single fireplace with an accessible roof, while homes with two fireplaces or moderate creosote buildup typically pay $225 to $400. If you haven’t cleaned the chimney in several years, or if there’s heavy glazed creosote from burning unseasoned wood, expect the job to land between $300 and $550. Most Fort Worth homeowners spend around $200 to $300 and the work is done in under two hours.
Those are real numbers, not ballpark guesses to get you on the phone. Chimney cleaning in Fort Worth, TX is priced by the level of buildup, the number of flues, roof accessibility, and whether you need add-ons like a chimney cap replacement or a video inspection. Below is exactly what drives the price, what a written quote should include, and what you should expect to pay in 2026.
Key Takeaways
- Basic chimney sweep in Fort Worth with normal soot: $149-$275 per flue
- Heavy creosote, double flues, or steep roofs push the job to $300-$550
- A chimney inspection added to a cleaning runs $75-$200 depending on level
- Written pricing before work starts is non-negotiable with a reputable company
- Annual cleaning keeps creosote below the threshold where it becomes a fire hazard
Chimney Cleaning Cost Breakdown (2026)
Here’s what Fort Worth chimney companies are charging in 2026, broken down by service line. These ranges come from what we quote and what we see on competitor invoices across Tarrant County.
| Service | Typical Fort Worth Price Range | Notes |
|---|---|---|
| Standard chimney sweep (1 flue, Level 1) | $149-$275 | Normal soot and use; about 45-75 minutes of work |
| Chimney sweep with heavy creosote (Level 2 buildup) | $300-$450 | Requires rotary loops and chemical treatment; 1.5-2.5 hours |
| Double-flue homes (2 chimneys or 2 flues) | $225-$400 | Done same visit; second flue usually discounted |
| Chimney sweep + chimney inspection (Level 2) | $325-$550 | Sweep plus video scan of the flue interior |
| Chimney cap replacement added to a sweep | $125-$350 | Price varies by cap size and material; installed same day |
| Chimney inspection only (no cleaning) | $125-$250 | Level 1 is lower end; Level 2 video scan is higher |
| Dryer vent cleaning as add-on | $75-$125 | Often bundled when a chimney pro is already on site |
One honest note about these numbers: a “cheap” $89 sweep in the Fort Worth area usually comes with a catch. Either the technician is incentivized to find “repairs” once they’re on the roof, or the low price covers only the flue itself, not the smoke chamber, damper area, or firebox. A thorough sweep covers all of it. The chimney cleaning cost you pay should match the scope in writing.
What Affects Chimney Cleaning Pricing in Fort Worth
Chimney cleaning is not one flat fee, and a company that quotes one before knowing anything about your house should make you suspicious. Here’s what actually moves the number in Fort Worth.
- Creosote stage. Dry, flaky creosote comes off with standard brushes. Stage 2 creosote, which is tar-like and shiny, needs rotary chain loops and often a chemical treatment. It takes longer and costs more. We see heavy Stage 2 glaze most often in homes where green or unseasoned oak gets burned. Oak is abundant in north Texas and it holds water for a long time after cutting.
- Number of flues. A single-family home in Fort Worth with a wood-burning fireplace and a gas water heater sharing the same chimney has two flues inside one chimney chase. That’s two sweeps, one visit, and a higher line item than a single-flue job.
- Roof pitch and accessibility. Steep roofs in older neighborhoods like Ridglea Hills or Oakhurst mean more time on the ladder, more safety rigging, and a slightly higher service charge. A walkable 4/12 roof is faster than a 10/12 pitch.
- Time since last cleaning. If it’s been six years and you burned fires every winter, the chimney has more in it than if it’s been swept annually. Buildup drives labor time, and labor time drives price.
- Chimney height. Two-story and three-story chimneys in areas like TCU-area or Ryan Place take longer to access and require more equipment setup than a single-story ranch in Wedgwood.
- Add-on work. If you need a new chimney cap, a damper adjustment, or a waterproofing treatment while we’re there, those are separate line items. A written quote should list them individually, not bury them in a lump sum.
Why Annual Chimney Cleaning Matters in Fort Worth Specifically
North Texas has two things working against a dirty chimney: temperature swings that stress flue tiles and abundant oak that gets burned before it fully seasons.
When you burn wood in a Fort Worth winter, the average fire burns at 400 to 700 degrees in a flue that’s cold-soaked from nights in the 20s. That temperature differential expands and contracts the flue liner every cycle. Add creosote, which is acidic when it absorbs moisture, and a liner that might have small cracks becomes a liner with bigger cracks within a few seasons. Most chimney fires in Tarrant County happen in January and February, during the coldest stretches when people load up their fireplaces every night.
A clean chimney doesn’t just prevent chimney fires. It also gets caught problems earlier. A Level 2 video inspection during a routine cleaning catches liner cracks, water intrusion at the crown, and missing mortar joints before they become four-figure repairs. That’s the difference between a $275 sweep now and a $3,500 flue relining in two years.
Hank Delano, who runs Flint Chimney Co Fort Worth, puts it plainly: “The cleanings are cheap insurance. The repairs are what cost real money. We’d rather sweep your flue every year and never sell you a relining job than show up for the first time in a decade and hand you bad news.”
What’s Included in a Proper Chimney Cleaning
Here’s what should be on your invoice when you pay for a chimney sweep in Fort Worth. If a company is charging below $150 and you’re not sure what they actually do, compare against this list.
- Flue brushing. The full vertical run, brushed with properly sized poly or wire brushes matched to the flue dimensions. A rectangular flue gets a rectangular brush. Round gets round. This sounds obvious but it’s skipped more than you’d think.
- Smoke chamber cleaning. The section above the damper where smoke compresses before entering the flue. Creosote collects here heavily. We brush it by hand.
- Firebox cleaning. Ash and soot removal from the firebox floor and walls.
- Damper check. We verify the damper opens, closes, and seals. A damper that won’t fully open smokes out the living room. One that won’t close pulls air-conditioned air up the flue all summer.
- Visual inspection of accessible components. Flue cap, crown, and flashing get looked at from the roof. Interior components get checked from below. We tell you what we see in plain terms, and we put any recommendations in writing.
- Property protection. Drop cloths and floor covers inside the home, and a vacuum system rated for fine soot particulates. Creosote dust is an irritant and a good company contains it.
All of that should be spelled out in the written price before any work starts. That’s how Flint Chimney Co runs every job under The Garrison Standard. The number on the estimate is the number on the invoice. There’s no on-site add-on pitch.
Chimney Cleaning vs. Chimney Inspection: What’s the Difference?
People use the two terms interchangeably, but they’re distinct services on a chimney company’s price sheet.
A chimney sweep is the physical cleaning: removing creosote, soot, and blockage from the flue, smoke chamber, and firebox. It’s the maintenance service you need annually if you burn wood more than a couple dozen times a season.
A chimney inspection is an assessment of the chimney’s structural condition. There are two common levels. A Level 1 inspection is visual; the technician looks at the accessible interior and exterior components and notes anything wrong. A Level 2 inspection adds a video camera scan of the flue interior, which reveals liner cracks, hidden creosote pockets, and separation between flue tiles that a visual check can’t catch. Fort Worth homes that have had a chimney fire, a change in fuel type, or a weather event that damaged the roof should get a Level 2 inspection before building the next fire.
The practical point: a chimney sweep and a Level 2 inspection are often done together, and we price the combination lower than scheduling them separately. If you’ve just bought a home in Fort Worth, the chimney was probably flagged in the home inspection anyway. Getting a proper video inspection before your first fire is the right move, and it typically adds $75 to $200 on top of a sweep.
How to Save on Chimney Cleaning in Fort Worth
There are a few legitimate ways to keep chimney cleaning costs down without hiring a butcher.
- Get the sweep done before peak season. September and October are slower months for chimney companies in Texas. By November, the first hard cold snap floods every chimney company with calls, and when demand spikes, so do prices and lead times. Book in early fall.
- Bundle the chimney inspection with the sweep. Doing both in one trip cuts the service call fee down to one. The inspection labor overlaps with the sweep setup, and most companies discount the combined package.
- Keep your firebox clean. Between professional cleanings, remove cold ash from the firebox after it sits for 48 hours. It reduces the time the tech spends shoveling out your firebox, and some companies pass that labor savings through.
- Burn seasoned wood only. Oak that has been cut, split, and stacked for at least 12 months produces a fraction of the creosote that green wood produces. If you buy firewood in Fort Worth, ask how long it’s been seasoned. Wet wood costs you more in cleaning and in fire risk.
- Ask about multi-service pricing. If you need a chimney cap installed, a damper adjusted, or a dryer vent cleaned, ask whether bundling them with your sweep reduces the per-item cost. We and most reputable Fort Worth companies will discount bundled work because we’re already on site with the truck set up.
Flint Chimney Co Fort Worth gives a free estimate on every job. That means you know the exact number before you approve anything, whether it’s a $199 single-flue sweep or a $450 sweep with a video inspection. Call (682) 255-2144 and we’ll talk through what your chimney actually needs, no pressure and no upsell.
FAQs – Chimney Cleaning Cost in Fort Worth
How much does chimney cleaning cost in Fort Worth?
Chimney cleaning in Fort Worth runs $149 to $275 for a standard single-flue sweep and $225 to $400 for homes with two flues or moderate creosote. Heavy Stage 2 creosote with rotary treatment lands between $300 and $550. Your exact price should be written down before the work starts. Call (682) 255-2144 for a free estimate and we’ll quote the exact number based on your home.
Is it cheaper to clean a chimney or repair it?
Cleaning is dramatically cheaper: a chimney sweep in Fort Worth costs $149 to $275, while a flue relining runs $2,500 to $6,000. Even an annual cleaning every year for two decades doesn’t reach the cost of one major repair. Routine sweeping also catches small problems before they become major ones, which is how you avoid the big-ticket repair entirely.
How often should I get my chimney cleaned in Fort Worth, TX?
If you burn wood fires more than 20 to 30 times per winter, once a year is the honest answer. Homes that burn occasional fires only, say a handful of times each season, can go two to three years between cleanings, but an annual inspection is still smart. Gas log fireplaces need less frequent cleaning, though the burner and logs should be checked periodically.
Can chimney cleaning be done the same day?
Yes, in most cases. In slower months like September and October, we can typically get a Fort Worth chimney swept same-day or next-day. During the first cold snap in November or December, lead times stretch to several days. Call early in the season and you’ll have more scheduling flexibility.
How long does a chimney cleaning take?
A standard single-flue chimney sweep takes 45 to 90 minutes. Heavy creosote requiring rotary treatment extends that to two hours or more. If you’re adding a video inspection or chimney cap replacement, expect the visit to run up to three hours total.
Is a $49 chimney sweep too good to be true?
Yes. In Fort Worth, a $49 or $89 “special” on chimney sweeping is a lead-generation tactic. The technician shows up, does a partial sweep, and then presents a list of urgent repairs that need to be done immediately. These companies make money on the repair upsell, not the sweep. A legitimate sweep costs $149 to $275 because the labor, equipment, and overhead are real. If the price seems too low to cover a a a trained tech on your roof with proper equipment for two hours, that’s because it is.
Why Fort Worth Homeowners Choose Flint Chimney Co
Every chimney cleaning we do in Fort Worth follows The Garrison Standard, the same operating code used by every Garrison Partners location. It’s simple enough to write out in four lines:
- Written price before work begins. The number you approve is the number you pay. No add-ons, no on-site escalations.
- A 365-Day Done Right Promise on every repair we make. If a covered repair fails within one full year, we come back out and fix it at no charge. That’s the written guarantee, and it’s on your invoice.
- Background-checked, uniformed technicians on every dispatch. You know who’s coming to your home before they arrive.
- Live person answers the phone 24/7. No voicemail trees, no callbacks, no waiting until Monday. Call at midnight because the chimney is smoking back into the house, and a human answers.
We work with professional-grade chimney materials: DuraFlex and Gelco liners when a relining is required, HeatShield resurfacing for flue tiles, and Olympia Chimney, Famco, and Copperfield components for caps, dampers, and chase covers. We specify by the job, not by our margin.
Hank Delano has run Flint Chimney Co Fort Worth since it became part of the Garrison Partners family, which was founded in 2002. The company operates off a simple principle: put everything in writing, do the work right, and stand behind it for a year. That’s the way it should work in this trade, and the way we do it in Fort Worth.
What a Written Chimney Cleaning Estimate Should Include
When you get a chimney cleaning estimate in Fort Worth, it should have these line items on paper:
- Number of flues being swept and the flue dimensions
- The cleaning method (standard brushing vs. rotary treatment for glazed creosote)
- Whether a Level 1 or Level 2 inspection is included
- Any add-on work: cap replacement, damper adjustment, waterproofing, dryer vent
- Total price with tax, clearly stated
- Guarantee terms in writing if repairs are involved
If an estimate is verbal only or has one lump number with no breakdown, treat it with suspicion. A written quote is the single most important thing a chimney company can give you, and it costs us nothing to produce one before a single tool comes off the truck.
Flint Chimney Co Fort Worth gives free estimates on every chimney sweep, chimney inspection, and chimney repair. You’ll get a written price, with the scope clearly outlined, before any work begins. Then you decide. No pressure and no surprises.
Get Your Fort Worth Chimney Cleaning Price in Writing
The best way to know what your chimney cleaning will actually cost is to call us at (682) 255-2144 and describe your fireplace and chimney setup. We’ll ask a few questions, give you a realistic price range over the phone, and schedule a visit. When we arrive, you get a written quote with the exact cost. You approve it, we do the work, and you get a clean chimney and a clear invoice.
If you’re in Oakhurst, Ridglea, TCU, Wedgwood, Ryan Place, or anywhere else in the Fort Worth area, we handle chimney cleaning for wood-burning fireplaces, gas fireplaces, and dryers. Call (682) 255-2144 or use the contact form on our home page to reach us. Your estimate is free, and so is the advice.
Pricing reflects the Fort Worth market as of 2026. Flint Chimney Co Fort Worth offers free estimates – call (682) 255-2144.
What Our Customers Say
"Smoky fireplace for years. Turned out the cap was clogged. Swapped it and the smoke is gone."
- Brandon T."Rebuilt the crown on our chimney where water had been getting in. Neat masonry and a fair price."
- Eddie J."Good work on the damper replacement. Had to wait for a part for a few days, but they stayed in touch."
- Glenn D.