Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Everman
A chimney inspection in Everman typically runs $189 to $389 for a Level 1, with Level 2 camera inspections landing between $349 and $589 depending on flue length and access. We get Everman homeowners scheduled within a few days, not weeks. Flint Chimney Co Fort Worth has been part of the Garrison Partners family since 2002, and our crews know the brick ranches along Enon Avenue, Trammell Davis Road, and the streets off Everman Parkway like the back of their hands. Call (682) 255-2144 and you’ll get a live person, not a voicemail tree.
Why Flint Chimney Co Fort Worth Is Everman’s Preferred Chimney Inspection Company
Everman homeowners call us because we put every price in writing before a single tool comes off the truck. That’s not a slogan. It’s how we’ve operated since 2002, and it’s codified in The Garrison Standard, the operating code every Garrison Partners location follows. You’ll know the cost of your Chimney Inspection before we start, and the invoice will match that number exactly.
Our technicians are background-checked and uniformed. You’ll know who’s walking through your door. Every inspection includes a written report with photos when applicable, and every repair we perform carries the 365-Day Done Right Promise: if it’s not done right, we return and make it right, free of charge, for a full year.
Phones are staffed by a live person around the clock. If you call at 9pm on a Sunday, a human answers. That matters when you’re smelling smoke in the living room and need someone to tell you whether it’s safe to stay put. We serve Everman directly, with crews dispatched from our Dallas-Fort Worth office and on the road to your door within a 40-minute drive.
Styles & brands we work with
Chimney Leak in Everman
A Chimney Leak in Everman almost always traces back to one of two things: a cracked crown letting water into the masonry, or a missing rain cap letting water straight down the flue. Everman’s clay soil shifts with moisture changes, and that movement translates up through the chimney stack, cracking the crown around the flue opening. Once water gets in, it works into the mortar joints during summer storms and widens them further every winter freeze.
Crown Failure and Water Entry
We seal and rebuild crowns with trade-grade materials specified by job, not by margin. If the damage is confined to the crown, a repair typically runs $450 to $900. If water has already saturated the flue liner and you’re seeing staining on the ceiling near the fireplace, the fix usually involves a new liner, and that’s where pricing starts climbing toward $2,500 and up depending on flue height. We won’t recommend a rebuild you don’t need. If it can wait, we’ll tell you plainly.
Missing Caps and Animal Entry
Many Everman chimneys lack proper rain caps. That’s an open invitation for squirrels and birds. They nest in the flue during dry summers, and by the first cold snap the draft is blocked, pushing smoke and carbon monoxide back into the house. A new Famco cap installed runs $225 to $475 depending on flue size and roof access.
Chimney Camera Inspection in Everman
A Chimney Camera Inspection in Everman is what catches what the naked eye cannot: spalled clay tile fragments lodged in the smoke chamber, third-degree creosote glaze lining the flue, and hairline cracks that a Level 1 visual check will miss every time. We run a camera down the full length of the flue and show you the footage. Nothing is recommended without evidence you can see yourself.
When the Camera Finds Spalled Tiles
Everman’s clay tile liners crack under expansive soil movement and decades of intense Texas heat. Those cracks release fragments that tumble into the smoke chamber and block the draft. Our crew pulled into Everman one afternoon after a 40-minute drive from the Fort Worth shop, heading to a brick ranch over near Enon Avenue. The homeowner had an original clay tile flue liner; our Level 2 camera inspection showed third-degree creosote glaze in the smoke chamber and spalling tiles two feet above the firebox. We recommended a HeatShield resurfacing and a new Famco rain cap, then walked him through the burning practices, smaller, hotter fires with seasoned wood, that would keep first-degree creosote from returning.
Creosote Stages and What They Mean
First-degree creosote brushes off as a sooty film. Second-degree is flaky and rougher. Third-degree is a hardened, tar-like glaze that a brush cannot remove. If a chimney company treats a glaze like a standard sweep and calls it done, they’ve left a fuel layer that can ignite. A camera inspection tells the difference in minutes, and it’s the only way to know whether your Everman home needs a straightforward cleaning or a deeper intervention.
Trusted Brands We Service in Everman
We work with professional-grade chimney materials backed by manufacturers who stand behind their products. Our Everman jobs routinely specify HeatShield for flue resurfacing, Famco rain caps for weather and animal proofing, and Olympia Chimney components for liner and termination work. When a part needs replacing, we don’t substitute whatever’s been sitting on the shelf. We order the right component for the job, which means your repair is done once and covered in writing for a year. Fast turnaround matters when your fireplace is down in November, and we keep our parts pipeline moving for Everman customers year-round.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Everman Homes
- Spalled clay tile liners. Expansive clay soil under Everman shifts with moisture changes, transmitting movement up through the chimney and cracking the original tile liners in homes built from the 1950s through the 1970s. Fragments fall into the smoke chamber and restrict draft.
- Missing or damaged rain caps. Squirrels and birds take advantage of uncapped flues during Everman’s dry summers, nesting in the flue and blocking airflow before the first cold snap.
- Third-degree creosote glaze. Infrequent but intense cold snaps lead homeowners to burn sporadically, often with unseasoned wood. That combination produces the tar-like glaze that no brush can remove and that poses the highest chimney fire risk.
- Cracked crowns and water intrusion. Severe thunderstorms and freeze-thaw cycles after rain widen crown cracks, letting water into the masonry and the flue liner, which accelerates spalling and shortens liner life.
Pricing for Chimney Inspection in Everman, TX
A Level 1 inspection in Everman runs $189 to $389. A Level 2 camera inspection runs $349 to $589, and a Level 3 inspection, which involves opening a portion of the masonry for direct visual access, runs $800 to $2,000 depending on scope. Real estate inspections for home sales fall into the Level 2 range for most Everman brick ranches. The final number depends on flue height, roof access difficulty, and whether the chimney has ever been serviced. We deliver a written price before any work starts, every time, no exceptions. Call (682) 255-2144 for a free estimate.
We Also Serve Cities Near Everman
Our crews cover Everman and the surrounding communities, including Chimney Inspection in Everman neighbors like Fort Worth, North Richland Hills, Haltom City, and Watauga. If you’re just outside Everman, call and ask about scheduling. We’ll give you a straight answer on timing and cost.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Inspection in Everman
Yes. The expansive clay soil under Everman swells when wet and shrinks when dry, moving enough over years to crack clay tile flue liners, especially in older brick ranches. A Level 2 camera inspection is the only way to see spalled tile fragments before they block your draft. If you live in a home built between the 1950s and 1980s, this applies to you. Call (682) 255-2144 to schedule a camera inspection and see exactly what’s going on inside your flue.
Once a year, minimum. Sporadic burning, which describes how most Everman homeowners use their fireplaces, creates exactly the conditions that produce heavy creosote: long periods of disuse followed by cold snaps with unseasoned or partially seasoned wood. Annual inspections catch the buildup before it becomes a chimney fire risk. Call (682) 255-2144 for an exact quote and we’ll work around your schedule.
Everman’s older housing stock has original wood-burning fireplaces, many of them unlined or with aging clay tile liners, and homeowners here tend to burn wood sporadically during cold snaps rather than continuously. That pattern produces heavier creosote deposits than steady, well-practiced burning habits. A gas fireplace doesn’t produce creosote at all, which is why neighbors with gas units never see this problem. If you’re seeing heavy buildup, call (682) 255-2144 and we’ll walk you through what the inspection shows.
Not necessarily. We see cracked crowns on Everman brick ranches regularly, and if the damage is confined to the crown, the repair runs $450 to $900 and takes one visit. A full rebuild is only needed when water has penetrated the masonry structure itself, and we’ll show you photo evidence before recommending something that extensive. Call (682) 255-2144 and we’ll give you a straight answer, in writing, before any work starts.
A Level 1 is a visual check of the accessible parts of the chimney and runs $189 to $389. A Level 2 adds a full video scan of the flue interior and runs $349 to $589. In Everman, where clay tile liners crack from soil movement and missing rain caps let animals nest, we recommend a Level 2 for most older brick ranches, especially if the home hasn’t been inspected in years. Call (682) 255-2144 and we’ll help you decide which level matches your situation.
If you’re in Everman and you haven’t had your chimney inspected this year, call (682) 255-2144. You’ll get a live person, a straight answer, and a written price before any work begins. That’s how we’ve done it since 2002.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Everman and the surrounding communities.