Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Fort Worth?
A chimney liner replacement in Fort Worth typically runs $1,800 to $4,200 for a standard 6-inch stainless steel flue, while a partial chimney rebuild (crown-to-shoulders masonry work) lands between $3,500 and $9,000 depending on access and brick condition. Most Fort Worth homeowners we serve pay somewhere in the $2,500 to $6,000 range when the two jobs are combined. The price you’ll actually pay depends on flue size, chimney height, roof pitch, and whether your existing masonry can be salvaged or needs to be torn down and relaid.
Key Takeaways
- Chimney liner replacement alone: $1,800 to $4,200 in Fort Worth
- Partial chimney rebuild (top 3 to 5 feet): $3,500 to $9,000
- Full chimney rebuild from the roofline up: $8,000 to $18,000
- Combined liner plus partial rebuild: $5,000 to $12,000 typical
- Every job at Flint Chimney Co Fort Worth gets a written price before work starts
- All repairs carry a written one-year guarantee (the 365-Day Done Right Promise)
- Call (682) 255-2144 for a free estimate with no call-back forms and no voicemail trees
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what Fort Worth homeowners can expect to pay in 2026, broken down by the specific job. These ranges come from real projects across Tarrant County: Keller, Arlington, Benbrook, White Settlement, and the near-southside neighborhoods like Fairmount and Ryan Place.
| Job Type | Typical Fort Worth Price Range | What’s Included |
|---|---|---|
| Stainless steel liner (6″ round, standard height) | $1,800 to $3,200 | DuraFlex or Olympia liner, top plate, rain cap, connector to appliance |
| Chimney liner with insulation wrap | $2,400 to $4,200 | Everything above plus insulation mix for older masonry chimneys |
| HeatShield cerfractory resurfacing (alternative to liner) | $2,800 to $5,500 | Ceramic-based resurfacing applied inside the existing flue |
| Concrete chimney crown replacement | $700 to $1,800 | Tear-out of cracked crown, new poured crown with drip edge |
| Partial rebuild (top 3 – 5 feet) | $3,500 to $9,000 | Demolition above roofline, new brick or matching masonry, new crown, new flashing |
| Full rebuild from roofline up | $8,000 to $18,000 | Complete tear-down and rebuild of exposed chimney, new liner, crown, and flashing |
| Chimney flashing replacement only | $500 to $1,500 | Remove old flashing, install new step and counter-flashing |
What moves the price up or down? The biggest factor is the condition of the brick itself. Fort Worth’s freeze-thaw cycles are hard on masonry, especially older homes in the Arlington Heights and Mistletoe Heights districts where chimneys date to the 1920s and 1930s. When water gets into brick and the temperature drops below freezing, the moisture expands and spalls (pops) the brick face. By the time we see it, there’s often more hidden damage than the homeowner expected. The second factor is height and roof pitch. A two-story chimney on a 10/12 pitch roof requires different staging and safety setup than a single-story chimney on a walkable pitch. That labor difference shows up in the final number.
What Affects Chimney Liner & Rebuild Pricing in Fort Worth
- Chimney height and roof access. A single-story chimney on a flat or low-pitch roof costs less to work on than a three-story stack on a steep cut-up roof. Houses in Westcliff and Tanglewood with tall, steep rooflines usually land at the higher end of our ranges because staging takes longer and safety setup matters more.
- Liner material and diameter. Most fireplace flues in Fort Worth take a 6-inch or 8-inch liner. Wood-burning stoves and some furnaces need larger diameter pipe, which costs more. We install DuraFlex stainless liners from Olympia Chimney as our standard because they carry a manufacturer’s transferable warranty and hold up to the heat and condensation of North Texas winters. HeatShield is a good alternative when the existing flue clay is mostly intact but has minor cracking or gaps.
- Masonry condition discovered after tear-down. This is the honest reality of chimney work. We don’t know what the bricks look like under the crown until we take the top section apart. If the mortar joints have turned to sand and the brick spalling goes deeper than expected, the rebuild scope grows. At Flint, the written price we give before work starts includes a defined scope, and if we find something that changes the work, we stop, show you what we found, and put the revision in writing before proceeding. No surprise charges.
- Permits and Fort Worth code requirements. The City of Fort Worth requires a permit for structural chimney rebuilds through the Development Services Department. Our project managers know the requirements and pull the permit before work begins. A straightforward liner replacement doesn’t typically require a permit, but anything that alters the masonry structure does. We factor this into the written estimate.
- Flashing and crown condition. You can’t put a new liner in a chimney with a cracked crown and leaking flashing and expect the system to stay dry. If the crown is cracked (which we see constantly in Fort Worth, thanks to hail storms and summer heat expanding and contracting the concrete), it needs to be replaced at the same time. That adds $700 to $1,800 to the job, but it prevents the new liner from being damaged by water intrusion within a year or two.
- Time of year. Chimney season in Texas runs roughly September through February, and demand peaks before the first cold snap. Spring and summer are slower, and while we don’t run seasonal discounts as a gimmick, booking during the off-season often means faster scheduling and more flexibility on dates.
Should You Repair or Replace Your Chimney in Fort Worth?
This is the question behind the rebuild question, and the answer is usually determined by the condition of the brickwork below the roofline. If the damage is limited to the top 3 to 5 feet (which is where most freeze-thaw and water damage concentrates on Fort Worth chimneys), a partial rebuild plus a new liner will give you another 20 to 30 years of service. If the spalling extends down into the attic space or the chimney is visibly leaning, a full rebuild is the only structurally sound option.
Here’s the rule of thumb we use: if more than 30% of the exposed brick is spalled or if the mortar joints crumble when you run a key across them, you’re looking at a rebuild rather than a spot repair. Patching brick on a chimney that’s actively deteriorating is throwing money at a symptom. The freeze-thaw cycle in North Texas means the damage will continue to spread every winter.
How to Save on Chimney Liner & Rebuild in Fort Worth
We’re not going to tell you to DIY a chimney rebuild. That’s how people get hurt and houses catch fire. But there are legitimate ways to keep the cost down without cutting corners on safety or materials:
- Get a Level 2 chimney inspection before you commit. A camera inspection of the flue interior costs a few hundred dollars and tells you exactly what condition the tile liner is actually in. Sometimes what looks like a liner failure from the outside is just a cracked crown. We’ve saved Fort Worth homeowners thousands by doing the inspection first and confirming the scope.
- Combine jobs when it makes sense. If the crown needs replacing and the liner is shot, doing both at once costs less than two separate service calls. You’re paying for staging, setup, and the crew to be on-site either way. One visit, one mobilization, one written price.
- Choose stainless steel over custom masonry when code and aesthetics allow. A DuraFlex liner with a cap performs as well as or better than most terra cotta tile systems and costs a fraction of a full masonry rebuild. If your brickwork is sound and the only failure is the liner, you don’t need to spend $10,000. This is where the $1,800 to $4,200 range applies.
- Book during the off-season. Spring and summer in Fort Worth are slower for chimney work. You won’t get a gimmick discount, but you’ll get faster scheduling and more room to plan the job properly.
- Call for a free estimate. We give written prices before any work starts, on every job, with no exceptions. The number you approve is the number on the invoice. Call (682) 255-2144 and a live person answers, 24/7. No voicemail trees, no callback forms.
What Our Chimney Liner & Rebuild in Fort Worth Service Includes
Every liner and rebuild job at Flint Chimney Co Fort Worth runs under The Garrison Standard, the same operating code every Garrison Partners location follows. Here’s what that means in practical terms:
- Written price before work starts. The scope, the materials, the labor, the permit costs, and the final price are on paper before a tool comes off the truck. You approve it, and that’s the number you pay.
- The 365-Day Done Right Promise. Every repair we make carries a written guarantee valid for one full year from the service date. If a covered repair fails within that year, we return at no charge. No argument, no fine print dance.
- Professional-grade materials specified by job, not margin. We install DuraFlex stainless liners, HeatShield cerfractory resurfacing, Gelco crowns and caps, Olympia Chimney components, Famco caps and dampers, and Copperfield chimney products. The material is chosen because it’s the right one for the job, and we’ll tell you exactly what’s going in and why.
- Background-checked, uniformed technicians. The person who shows up at your door is the person we dispatched. You’ll know their name before they arrive, and they’ll be in uniform when they get there.
- A live person answers the phone 24/7. Fort Worth doesn’t stop needing chimney help at 5 p.m. on a Friday. Neither do we.
Hank Delano runs our Fort Worth operation. He has spent over two decades in the chimney trade and still reviews job scopes personally before they go to a homeowner for approval. That level of oversight is part of why we put our guarantee in writing on every job.
What Happens If a Chimney Liner Fails in Forth Worth?
This is the scenario that drives most liner replacements we do in Fort Worth. A homeowner gets a chimney sweep or inspection and finds that the original terra cotta tile liner is cracked, flaking, or missing in sections. The danger is straightforward: a compromised liner allows heat and combustion gases to reach the brick and framing around the chimney. In the best case, that causes draft problems and smoky fires. In the worst case, it causes a chimney fire or carbon monoxide leaking into the house.
If your liner is failing, the fix is either a stainless steel liner installed inside the existing flue or a HeatShield resurfacing treatment that restores the ceramic surface. Both are proven solutions. The stainless option works even when the original tile is severely damaged, which is why it’s the more common choice in older Fort Worth homes. HeatShield is ideal when the flue has minor cracks but is otherwise structurally sound.
Neither of these is a DIY project. Working inside a flue requires specialized tools, fall protection, and the training to know what “right” looks like. A liner that’s improperly connected at the appliance or not properly terminated at the top is as dangerous as no liner at all. We flag this because chimney work that goes wrong doesn’t just fail quietly. It fails in ways that can put your family at risk.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner replacement cost in Fort Worth?
A standard stainless steel chimney liner replacement in Fort Worth costs $1,800 to $4,200 in 2026, with most single-flue jobs landing between $2,200 and $3,200. The range depends on chimney height, liner diameter, and whether insulation is needed. Call (682) 255-2144 for a free written estimate with the exact number for your chimney.
Is it cheaper to repair or rebuild a chimney in Fort Worth?
Repair is cheaper when the damage is limited to the liner, crown, or flashing ($1,800 to $5,500 total). A partial rebuild starts at $3,500 and only makes sense when the brickwork itself is failing. The right answer depends on the condition of your masonry, which is why we recommend a home inspection camera before you make a repair-versus-rebuild decision.
How much does a full chimney rebuild cost in Fort Worth?
A full chimney rebuild in Fort Worth (tear-down from the roofline and rebuild with new liner, crown, and flashing) costs $8,000 to $18,000 in 2026. Partial rebuilds of the top 3 to 5 feet run $3,500 to $9,000. The spread depends on chimney height, roof access, brick type, and whether the masonry below the roofline can be salvaged.
Can you come inspect my chimney the same day?
In most Fort Worth neighborhoods, yes. We answer the phone 24/7, and our technicians can usually reach homes in the Tarrant County area the same day for urgent chimney issues. A chimney inspection with a camera typically takes 1 to 2 hours and gives you a written assessment and a written price for any work that’s needed. Call (682) 255-2144 and we’ll tell you honestly when we can be there.
Does homeowner’s insurance cover chimney rebuild costs in Fort Worth?
Most homeowner’s policies in Texas cover chimney rebuilds only when the damage came from a covered peril, like a lightning strike, a tree falling, or a windstorm. Freeze-thaw damage, general aging, and deferred maintenance are usually not covered. If your chimney was hit by hail or storm damage, document it and file a claim quickly. Then call us at (682) 255-2144 for a written estimate to submit with your claim.
How long does a chimney rebuild take?
A partial chimney rebuild in Fort Worth takes 3 to 5 working days on site, depending on weather and brick matching. A full rebuild from the roofline takes 1 to 2 weeks. A liner replacement alone is usually a 1-day job. We’ll give you a schedule in writing along with your price, and your technician will arrive within the window we give you.
Written by Hank Delano, Owner at Flint Chimney Co Fort Worth, serving Fort Worth and Tarrant County since 2002. Pricing reflects the Fort Worth market as of 2026. Flint Chimney Co Fort Worth offers free estimates – call (682) 255-2144.
What Our Customers Say
"Great sweep. Only thing, the appointment window ran long and I waited. Cleanup was spotless though."
- Marge P."Very respectful, wore boot covers, laid drop cloths. Left no soot."
- Jan S."Level 2 inspection before we bought the house. Report was detailed and saved us from a bad surprise."
- Archie M.